Name: Shenzhen Honred Technology Co., Ltd.
Address: 2F, Building A1, Runteng Industrial Park, Xishan Road 4, Shiyan Street, Bao'an District, Shenzhen, Guangdong, 518000, CN
Telephone: +86-18688976300
Price range: $$

Keywords:

Automatic Screw Driving Machines Dispensing & Soldering Equipment Vision Inspection Non-standard Equipment SMT Equipment

News

- Industry News
- Tech Wiki

Service Hotline

18688976300

Mobile: 18688976300 (Mr. Peng) 15222276387 (Mr. Bai)

Email: pengwl@honred.com

QQ： 176496342

Address: Building A1, Runteng Industrial Park, Shiyan Street, Bao'an District, Shenzhen

Location: Home >> News >> Tech Wiki

How Cycle Time for an Automatic Screw Removal Machine Is Actually Calculated

Quoted cycle time often differs widely from what a line actually achieves. This article breaks removal cycle time into load, vision, move, per-point motion and ···

2026-10-16
Learn More
Daily and Periodic Inspection Checklist for Automatic Fastening and Removal Equipment

Downtime on micro-screw equipment usually accumulates from small problems. This article gives daily, weekly, monthly and quarterly check items, a wear-part repl···

2026-10-15
Learn More
Recipe Management and Program Changeover on Combined Drive-and-Remove Machines: Turning Changeover from a Setup Job into a Program Selection

What determines changeover speed is usually parameter management, not the mechanism. This article covers the four parameter groups and their coupling, three org···

2026-10-14
Learn More
Cam-Out and Screw Breakage in Micro-Screws: Causes and Prevention

Cam-out and breakage look instantaneous, but their causes are layered into what happens before the motion: recess-bit mismatch, torque settings out of step with···

2026-10-13
Learn More
Common Causes of Screw Feeding Jams and How to Troubleshoot Them

Screw feeding jams stem from six layers — incoming material, rail, air circuit, vacuum, takt and environment — with similar symptoms but different causes. Thi···

2026-10-12
Learn More
Fixture Design and Changeover Efficiency for Non-Standard Screw Removal Stations

Fixtures often affect removal yield more directly than the machine itself. This article covers four design points — locating datum, bit clearance, clamping def···

2026-10-11
Learn More
How to Set Removal Torque: A Method from Avoiding Cam-Out to Protecting the Thread

Removal torque is not simply the assembly torque reversed. This article explains how to set removal torque for micro-screws — from avoiding cam-out to protecti···

2026-10-10
Learn More
How to Design Poka-Yoke on Automatic Fastening and Removal Lines: Detection Logic from Missing and Loose Screws to Wrong Parts and Missed Removals

The core of poka-yoke on automatic fastening and removal lines is replacing manual visual checks with process data. This article covers missing, loose and wrong···

2026-10-09
Learn More

Home << 1 2 3 4 5 3/5 >> Last